This tool is a life saver! I am in the process of remodeling my guest bathroom. After removing the bathtub, I found out that the tub drain and p-trap under the subfloor was cracked right at the joint of my 4 way sewer connection. Replacing this connection under the floor would have been extremely problematic, so I went on the search for an alternative and came across this PVC pipe reamer. This tool worked perfectly to bore out the old broken pipe so I could install a new one. It was easy to use and it got the job done. The new pipe fit snug in the connection and sealed properly with ABS cement. Just make sure that you take your time to line up the reamer in the pipe, and then use a variable speed drill to maintain control of the tool while not causing the pipe to heat up and melt due to friction. The whole process start to finish only took me a couple minutes and saved me a ton of time and headaches. Highly recommend!

Oh the number of times I've had to do a major rework because one of the pipes broke inside the fitting. It usually required cutting out a larger section and then rebuilding it. But now I can leave the fitting where it is and reuse it by drilling out the broken pipe with this set of reamers. It's really cool - you just use the right size reamer, attach it to a drill and the tool does all the work. When you're done, the fitting will once again accept a new piece of pvc pipe. Not that I ever wish for plumbing problems, but if I do have more I'm way better prepared with this great set of reamers. Stainless steel, easy to use and a big time saver.

This tool worked very well saving a larger repair in a tight area for an irrigation/ sprinkler system. The connecting PVC pipe cracked, the damaged piece was cut at the joint, and then central glued pipe drilled/ reamed. At the completion a few small pieces of the remaining drilled pipe were removed with a small screwdriver and sanding paper was used for a snug fit. It was glued with a new PVC pipe without incident.

I tested this out on a 3/4” elbow and was impressed that it works just as quickly as my more expensive 1” version. It also cut a smoother hole than what I’m used to on my other version. It left the hole slightly undersized, which was great to prevent a sloppy and leak prone fit. I was able to go back with the tool and apply a little pressure to the side in locations where old glue was still visible to achieve a perfect fit. After using this pipe fitting saver, I feel silly for paying so much more for more expensive versions in the past. This one works just as well if not better and is a great value.

This tool is a life saver! I am in the process of remodeling my guest bathroom. After removing the bathtub, I found out that the tub drain and p-trap under the subfloor was cracked right at the joint of my 4 way sewer connection. Replacing this connection under the floor would have been extremely problematic, so I went on the search for an alternative and came across this PVC pipe reamer. This tool worked perfectly to bore out the old broken pipe so I could install a new one. It was easy to use and it got the job done. The new pipe fit snug in the connection and sealed properly with ABS cement. Just make sure that you take your time to line up the reamer in the pipe, and then use a variable speed drill to maintain control of the tool while not causing the pipe to heat up and melt due to friction. The whole process start to finish only took me a couple minutes and saved me a ton of time and headaches. Highly recommend!

Oh the number of times I've had to do a major rework because one of the pipes broke inside the fitting. It usually required cutting out a larger section and then rebuilding it. But now I can leave the fitting where it is and reuse it by drilling out the broken pipe with this set of reamers. It's really cool - you just use the right size reamer, attach it to a drill and the tool does all the work. When you're done, the fitting will once again accept a new piece of pvc pipe. Not that I ever wish for plumbing problems, but if I do have more I'm way better prepared with this great set of reamers. Stainless steel, easy to use and a big time saver.

This tool worked very well saving a larger repair in a tight area for an irrigation/ sprinkler system. The connecting PVC pipe cracked, the damaged piece was cut at the joint, and then central glued pipe drilled/ reamed. At the completion a few small pieces of the remaining drilled pipe were removed with a small screwdriver and sanding paper was used for a snug fit. It was glued with a new PVC pipe without incident.

I tested this out on a 3/4” elbow and was impressed that it works just as quickly as my more expensive 1” version. It also cut a smoother hole than what I’m used to on my other version. It left the hole slightly undersized, which was great to prevent a sloppy and leak prone fit. I was able to go back with the tool and apply a little pressure to the side in locations where old glue was still visible to achieve a perfect fit. After using this pipe fitting saver, I feel silly for paying so much more for more expensive versions in the past. This one works just as well if not better and is a great value.

This tool is a life saver! I am in the process of remodeling my guest bathroom. After removing the bathtub, I found out that the tub drain and p-trap under the subfloor was cracked right at the joint of my 4 way sewer connection. Replacing this connection under the floor would have been extremely problematic, so I went on the search for an alternative and came across this PVC pipe reamer. This tool worked perfectly to bore out the old broken pipe so I could install a new one. It was easy to use and it got the job done. The new pipe fit snug in the connection and sealed properly with ABS cement. Just make sure that you take your time to line up the reamer in the pipe, and then use a variable speed drill to maintain control of the tool while not causing the pipe to heat up and melt due to friction. The whole process start to finish only took me a couple minutes and saved me a ton of time and headaches. Highly recommend!

Oh the number of times I've had to do a major rework because one of the pipes broke inside the fitting. It usually required cutting out a larger section and then rebuilding it. But now I can leave the fitting where it is and reuse it by drilling out the broken pipe with this set of reamers. It's really cool - you just use the right size reamer, attach it to a drill and the tool does all the work. When you're done, the fitting will once again accept a new piece of pvc pipe. Not that I ever wish for plumbing problems, but if I do have more I'm way better prepared with this great set of reamers. Stainless steel, easy to use and a big time saver.

This tool worked very well saving a larger repair in a tight area for an irrigation/ sprinkler system. The connecting PVC pipe cracked, the damaged piece was cut at the joint, and then central glued pipe drilled/ reamed. At the completion a few small pieces of the remaining drilled pipe were removed with a small screwdriver and sanding paper was used for a snug fit. It was glued with a new PVC pipe without incident.

I tested this out on a 3/4” elbow and was impressed that it works just as quickly as my more expensive 1” version. It also cut a smoother hole than what I’m used to on my other version. It left the hole slightly undersized, which was great to prevent a sloppy and leak prone fit. I was able to go back with the tool and apply a little pressure to the side in locations where old glue was still visible to achieve a perfect fit. After using this pipe fitting saver, I feel silly for paying so much more for more expensive versions in the past. This one works just as well if not better and is a great value.

This tool is a life saver! I am in the process of remodeling my guest bathroom. After removing the bathtub, I found out that the tub drain and p-trap under the subfloor was cracked right at the joint of my 4 way sewer connection. Replacing this connection under the floor would have been extremely problematic, so I went on the search for an alternative and came across this PVC pipe reamer. This tool worked perfectly to bore out the old broken pipe so I could install a new one. It was easy to use and it got the job done. The new pipe fit snug in the connection and sealed properly with ABS cement. Just make sure that you take your time to line up the reamer in the pipe, and then use a variable speed drill to maintain control of the tool while not causing the pipe to heat up and melt due to friction. The whole process start to finish only took me a couple minutes and saved me a ton of time and headaches. Highly recommend!

Oh the number of times I've had to do a major rework because one of the pipes broke inside the fitting. It usually required cutting out a larger section and then rebuilding it. But now I can leave the fitting where it is and reuse it by drilling out the broken pipe with this set of reamers. It's really cool - you just use the right size reamer, attach it to a drill and the tool does all the work. When you're done, the fitting will once again accept a new piece of pvc pipe. Not that I ever wish for plumbing problems, but if I do have more I'm way better prepared with this great set of reamers. Stainless steel, easy to use and a big time saver.

This tool worked very well saving a larger repair in a tight area for an irrigation/ sprinkler system. The connecting PVC pipe cracked, the damaged piece was cut at the joint, and then central glued pipe drilled/ reamed. At the completion a few small pieces of the remaining drilled pipe were removed with a small screwdriver and sanding paper was used for a snug fit. It was glued with a new PVC pipe without incident.

I tested this out on a 3/4” elbow and was impressed that it works just as quickly as my more expensive 1” version. It also cut a smoother hole than what I’m used to on my other version. It left the hole slightly undersized, which was great to prevent a sloppy and leak prone fit. I was able to go back with the tool and apply a little pressure to the side in locations where old glue was still visible to achieve a perfect fit. After using this pipe fitting saver, I feel silly for paying so much more for more expensive versions in the past. This one works just as well if not better and is a great value.